Ships internationally!
Do you want to get into resin but don’t know where to start? Have your heard the buzz? Resin is HOT and turning into a RESIN OBSESSION. You have found the place to get everything you need to get started casting with resin!
RESIN OBSESSION has HOW-TO VIDEOS embedded in the listings as well as a RESIN OBSESSION store page of videos to guide you. There is a RESIN OBSESSION BLOG that will allow you to share pictures and chat about our RESIN OBSESSION. So come on get started and join in on the FUN.
RESIN OBSESSION Beginner Starter Kit Set with Pigments & Dyes
*ResinObsession's SuperClear Resin 6 oz
*Castin' Craft MOLD RELEASE AND CONDITIONER
*6 REUSABLE RESIN MEASURING 10 oz MIXING CUPS
*3 stir sticks
*
Basic Shapes MOLD 405 16 cavity 7 shapes *1 ounce REUSABLE RESIN MIXING CUPS quantity 20
*Pair of nitrile gloves
Introducing ResinObsession's Super Clear Resin:
bubbles easily dissipate
ships worldwide
super clear custom formula
non-toxic formula
low to no odor
2 to 1 formula
4 oz bottle of resin, 2 oz bottle of hardener
25 minute open time
6-8 hour cure time at room temperature
1 hour cure time with 150 degree F heat, example: putting it in a hot box
- The age old question on yellowing the resin with a torch. You should not touch the epoxy with the flame of the torch, all this does is burn the epoxy and cause it to turn amber. All you need is the carbon dioxide from the torch to break the bubbles not the flame. Just by putting the torch over the epoxy will start the bubble removal, and keep the flame away from the epoxy.
No worries about the REUSABLE RESIN MEASURING MIXING CUPS cup contaminating your resin. Easy to see measuring lines for accurate measures. Just wipe clean with a paper towel, little household cooking spray while the resin is still wet in the cup, then a final wipe with a second paper towel. And clean up is done!
Basic Shapes Mold 403 - 22 Cavity is a durable, reusable polyethylene mold.
Entire mold: 7" x 8"
- 2 Rectangles: 1" x 1-1/2"
- 2 Squares: 3/4"
- 2 Trapezoids: 3/4" x 1"
- 2 Irregular polygons: 3/4" x 1"
- Largest teardrop: 1-1/4" x 3/4"
- Smallest teardrop: 1/2" x 1"
- 2 Large ovals: 1-1/2" x 1-1/4"
- 2 Small ovals: 3/4 " x 1/2"
- 2 Large oblongs: 3/4" x 3/4"
- 2 Small oblongs: 1/4" x 1/2"
- 2 Hearts: 1" x 1"
With EasyCast Mold Release and Conditioner this durable reusable polypropylene mold is easy to use time and time again. Use EasyCast Mold Release and Conditioner so your castings “pop” out of the molds every time and to keep your molds in good condition to use over and over again.
Candy color pigments contains 1/4 ounce each of the following SUPER CONCENTRATED EXTRA FINE GROUND POWDER PIGMENTS:
- Teal
- Red
- Yellow
- Blue
- Orange
- Pink
- Green
- Raspberry
- Purple
Neon and fluorescent color pigments contains 1/4 ounce each of the following SUPER CONCENTRATED EXTRA FINE GROUND POWDER PIGMENTS:
- Fluorescent orange
- Fluorescent green
- Neon Pink
- Neon yellow
One customer says:
I am very excited to send this e-mail to you! As you know I was having some problems with the Resin I was using, when it came to big items that was sanded not being clear. Well I just tried your new Super Clear Resin and it ROCKS! I just got done with 2 test bangles and they turned out great. I did exactly the same thing I did with the other Resin and yours is super clear! I am so excited! I was hesitant about switching resins because I am new to resin and had worked out some of the kinks with the other Resin when it came to bubbles. Each resin is a little different to work with (I hear). But I am so happy I tried yours.
After the bangles were cured, I sanded (under water with a dash of dawn) with wet dry sandpaper 320 - 400 - 600 - 800 - 1200 - 2000. After that I used your Novus 1 - 2 - 3 kit. And it brought the clear right back to the bangles. I did not even have to use my buffer on them. I will be putting pictures of them on my face book page if you want to look see. This is also the first bangles I have done with colored ink in them.
I have watched some of your videos and I think you do a great job on how to’s. I think you are adorable in the videos!
Thank you again for your great work and a great product!
