- August 19, 2018 at 2:35 am #15092Ellene SoutherlandGuest
I just finished a resin pour which I love! and used painters tape on the edges because I did not want the resin on the sides of the 2 inch canvas. The tape worked perfectly however, I have a resin edge on top of my painting that is slightly higher than the pour. What is the best way to trim the top 4 sides without digging into my resin painting. If its a dremel which attachment. Thanks
- August 19, 2018 at 4:29 pm #15107Katherine SwiftKeymaster
Using a dremel is not my first choice for this project. Because of the nature of the wheel, it tends to leave half moons along the edge that you will have to sand by hand anyways. It’s also a lot easier to take off too much too quickly. To get an even surface, I would do this by hand.
- September 21, 2020 at 9:49 am #88402Katherine SwiftKeymaster
This article explains how to sand resin: https://www.resinobsession.com/resin-frequently-asked-questions/how-to-sand-resin-smooth/
- The topic ‘How to fix resin edges’ is closed to new replies.