[Jim Wilson]

I wish to cast some pieces that require a bit of flex or ‘give’ rather than snap and break should it be dropped or sat upon.
My pieces will be 5 inches long, 3/4 inch wide and 1/4 inch thick. They also will be cast with a bit of a curve or arch in the pieces.

Is a resin available that has strength but can still have some ‘give’ to it?

Thanks
Jim

[Katherine Swift]

Hi Jim,

Your question was answered with your original post: https://www.resinobsession.com/forums/topic/choosing-a-flexible-resin/

[Author]

Posts