- April 5, 2018 at 2:04 pm #12950
This question comes from Sandy:
- April 5, 2018 at 2:05 pm #12951
- December 3, 2018 at 4:26 pm #17905Veronica ArellanoGuest
- December 5, 2018 at 4:12 pm #18503
I don’t know. I have never tried that.
- August 28, 2019 at 3:39 pm #82250ElizabethGuest
I am making round resin coasters. I am putting a layer of Mod Podge on the hardened resin and putting a coat of Mod Podge on the card stock paper and placing it on top of the resin. I also apply the layer of the Mod Podge on the back of the card stock and letting it dry before I apply another layer of resin. I used the matte finish for the Mod podge but I am noticing that my coasters are still coming out shiny on the picture side and I see streaks. What am I doing wrong?
- August 28, 2019 at 5:26 pm #82252
- August 29, 2019 at 7:22 pm #82261Ayla GradyGuest
- August 30, 2019 at 11:37 am #82267
- October 15, 2019 at 12:56 pm #82594BernadetteGuest
- October 31, 2019 at 5:42 pm #82713PresleyGuest
- November 1, 2019 at 11:41 am #82717
Hi Presley, I would expect it to work well.
- December 7, 2019 at 9:57 pm #83052LaynaGuest
- December 8, 2019 at 9:35 pm #83057
I’m afraid I don’t know. I’ve never used spray Mod Podge.
- December 20, 2019 at 3:55 am #83127Cheyenne ReamsGuest
I am using ceramic tiles and photo paper pictures to make coasters. I am glueing the photos down with Mod Podge and then waiting a few hours and then covering with art resin. But the edges keep coming up on the pictures. What am I doing wrong? Should I glue down with something other than mod podge ?
- December 20, 2019 at 2:31 pm #83131
- April 8, 2020 at 5:58 pm #84004FionaGuest
I’m making a train diorama with a resin river and realized I have matte mod podge and not high gloss. I was hoping to use the mod podge to make ripples and realistic water effects but am concerned it will look muddy with the matte finish. Unless I order online and wait a month for a new bottle to come in, what would be the reccomended substitute or other process of getting similar effects? Thanks in advance!
- April 9, 2020 at 2:09 pm #84014
Hi Fiona, what about using a little bit of colored resin to look like waves?
- April 9, 2020 at 3:35 pm #84015FionaGuest
Hi Katherine, could you explain further? I’m new to resin and still learning techniques.
- April 10, 2020 at 12:55 pm #84024
- May 28, 2020 at 3:29 am #84533MikaelaGuest
Thanks in advance!!
- May 28, 2020 at 10:53 am #84534
Resin will stick to the glue.
- June 10, 2020 at 3:55 am #84657EllowGuest
- June 10, 2020 at 11:19 am #84660
- July 3, 2020 at 3:14 am #84928KristenGuest
- July 3, 2020 at 2:28 pm #84932
- August 21, 2020 at 1:39 pm #85614MaddeGuest
- August 21, 2020 at 2:29 pm #85616
I’m afraid Mod Podge isn’t going to make your resin charms any stronger.
It sounds like it could be the resin. Which brand are you using?
- August 21, 2020 at 3:12 pm #85623MaddeGuest
I am using easy cast clear casting epoxy by castin’craft
- August 22, 2020 at 10:55 am #85627
It’s been my experience with EasyCast that even when fully cured, it’s quite flexible.
- August 27, 2020 at 5:09 pm #85673Bertha BarrientosGuest
I just epoxy a glitter tumbler but my glitter shifted a little can i re apply modhe podge over and redo it or do i have to strip the cup?
- August 28, 2020 at 11:37 am #85678
I think trying Mod Podge is a good idea. You can always strip the cup if it doesn’t work.