[Till]

Hi, I have the Problem that Everything looks well when I put the resin on my work and for 45 Min. I always watch it and torch bubbles away but when I let it cure and look after it after a while there are dimpels all over the surface. Even when it‘s already the second layer. What can I do to avoid this?

[Katherine Swift]

Hi Till,

This sounds so frustrating! Are you sure you are using enough resin to cover the surface? If you don’t, it will pull away and leave the dimples you describe.

Our resin calculator does the math for you here: https://www.resinobsession.com/resin-calculator/

[Author]

Posts