Trying to prevent blending of color layers

Home Page Forums Resin Techniques Trying to prevent blending of color layers

Viewing 1 reply thread
  • Author
    Posts
    • #5760
      Katherine Swift
      Keymaster

      This question comes through email by Angel:

      I am going to try using opaque resin in a silicone mold. I usually work with polymer clay and plaster. My question is, if I want the main part of the mold to be opaque, can I put colored resin on top of that without it bleeding down or must I wait for the opaque layer to cure then fill the rest of the mold with a colored resin. Thank you.

    • #5761
      Katherine Swift
      Keymaster

      As long as you wait until one layer is fully cured before pouring the next layer, the colors will not blend.

Viewing 1 reply thread
  • The topic ‘Trying to prevent blending of color layers’ is closed to new replies.