White pits while sanding resin

Viewing 1 reply thread
  • Author
    Posts
    • #10061
      Katherine Swift
      Keymaster

      This question comes from Lorrie:

      Hello! Help! I use doming resin for my pieces. When I start to smooth rough edges, I use the wed/dry 400 and 1500 grit sand paper. However, I am noticing white pits and that I can’t sand out. then I rub with a little dab of coconut or cooking oil. This still doesn’t do the trick. Should I rub a compound first, then spray with your shine and sealant?? Thanks for your help.

    • #10062
      Katherine Swift
      Keymaster

      Hi Lorrie,

      This usually happens when the resin dust melts back into your piece because of the friction from sanding. If you sand the piece under water, this shouldn’t happen. You can see what I’m talking about in this video: https://www.youtube.com/watch?v=51kSn5Xqfw8

Viewing 1 reply thread
  • The topic ‘White pits while sanding resin’ is closed to new replies.
Subscribe to blog updates
Follow on Pinterest
Follow on Pinterest
Follow on Pinterest
Follow on Instagram
Follow on Youtube
Follow on Youtube