How to make a scarf pin
With Spring fast approaching, or at least that’s what I’m being told, I feel we need something that reminds us of Spring! To me, when I think of Spring, I think of pastels and whimsical things, so what better than a giant watercolor button that makes a great DIY scarf pin!
Step 1: Prepare the mold.
Not shown: Prep the mold with mold release and allow it to dry.
Step 2: Mix resin and add to the mold.
Since I want the marker’s effect to show through clearly, the base will be with Resin Obsession Super Clear Resin. I’m going to mix and pour 15 ml of resin to fill it halfway. Being that the weather in California has been so weird, it took a couple of hours for my resin to set to the point of handling the markers, so I left it overnight.
Step 3: Color the resin
After it cured, I started coloring it with my markers. I decided on primary colors around the edges and secondary colors for the center.
Step 4: Blend the colors at the edges
Next, wet a paintbrush with rubbing alcohol, then dab it over the colors, so the ink will bleed and fade out. The more you add, the more dispersed it will be. I tried to keep it mainly on the edges since watercolors tend to have a strong point and blend out from it. Definitely look up examples while you do this. Once it is at a point that you like, leave it to dry completely. While I know it has worked for others, resin and alcohol have not worked well for me. I like to make sure they are fully dry before moving onto the second layer.
Step 5: Add the second layer of resin
After the alcohol and ink are dry, it’s time to move onto the second layer of resin. I mixed up another 15ml of resin. Since I want these colors to really stand out, I colored this resin with Opaque Castin Craft dye in white, and added some white glitter, because I have a glitter problem! I poured that over the clear layer, and let that sit overnight as well.
Step 6: Demold
Once that layer is cured, unmold gently, and admire your work! I thought this turned out beautifully, and the two resins had no problem fusing to each other! I will actually be using it as a scarf pin which I will be gifting to a friend. I also plan on making a few more and adding them to a hoodie as some silly eyes. I loved this project and I adore this mold, and I really hope you get a chance to make your own DIY scarf pin!
Unpublished Blog Posts of Resin Obsession, LLC © 2020 Resin Obsession, LLC