Neon ombre resin cuff bracelet – make a resin bracelet


How to make a resin cuff bracelet

By Myléne Hillam
Mill Lane Studio

If you love creating jewelry in funky colors, then you are going to love this neon ombre resin cuff bracelet project.  It takes several bright, fun colors and combines them into an eye-catching cuff bracelet!

Supplies need for this resin cuff bracelet project:

Resin Obsession Super Clear Resin
Resin Obsession Transparent Pigments: Bright Yellow; Bright Red; Bright Pink; Bright Magenta
Silicone cake decorating mold – Egypt Pyramid – Here is an example of one
Measuring cups
Wooden stir sticks
Bracelet form
Rubber bands

neon resin colors

Step 1:  Mix and color resin

Measure a total of 1 1/2 ounces total (15 mls) of resin and hardener. Mix according to the package instructions. Divide it into 4 cups and color each cup with a different colored bright pigment. To keep the resin translucent, only add a small drop, mixing well. Leave the mixed resin on your workspace for 5 minutes for the bubbles to dissipate.

pour neon resin into silicone mold

Step 2:  Add colored resin to the silicone mold

Pour the magenta and yellow into the opposite ends of the mould.

pour neon resin into mold

Next, pour the pink resin next to the magenta resin and the red resin next to the yellow resin, allowing the colours to blend into each other.

blend resin together to make ombre colors

Step 3:  Blend the colors

Use a wooden stir stick to draw the red resin into the yellow resin and mix the two colours together to create orange. Set aside to cure for a couple of hours until the resin has firmed up but the resin can still be flexed.

demold resin by peeling away silicone mold

Step 4:  Demold the resin

Once the resin is at the soft cure stage, release the resin from the mold by pulling the silicone away from the strip of resin.

The soft cure stage of resin is when it is cured, but still bendable.  This time varies from resin to resin.  For the super clear resin, this is about 1 1/2 to 2 hours after pouring.

ombre resin casting

The result is a strip of yummy neon ombré!

secure resin with rubber bands

Step 5:  Form the resin

Place the strip of resin around a bracelet form and secure it by placing elastic bands in the channels of the rows of the pyramids.

Pro tip:  Be gentle with the resin.  You want to maintain the texture on the outside of the bracelet.

ombre resin bracelet cuff

Set the cuff aside for 24 hours to harden into its new shape.

neon ombre resin bracelet

Enjoy your new neon ombre resin cuff bracelet!



Unpublished Blog Posts of Resin Obsession, LLC © 2020 Resin Obsession, LLC

Like this post? You may be interested in  How to make keepsake jewelry with resin

4 thoughts on “Neon ombre resin cuff bracelet – make a resin bracelet

  1. Wow! I had no idea you could handle resin in a partially cured stage like that. This opens up so many possibilities, thank you!!

Leave a Reply

Your email address will not be published. Required fields are marked *