[Sharon J Wyman-Rogers]

I made a 2 color bangle the other day. I’ve let it cure for 3 days. When I took it out of the mold I notice that the topside of the bangle is still not fully cured. The rest of the bangle seems like it has hardened correctly. Did I do something wrong or is there something I can do to get the top to harden?

[Katherine Swift]

Hi Sharon, it sounds like your resin wasn’t thoroughly mixed. The initial amount you poured was from the center of the cup, which was well mixed. By the time you get to the end and are scraping out the resin from the side, if it isn’t mixed well, it will stay sticky.

Unfortunately, I don’t know that it’s going to cure. This article explains more:
https://www.resinobsession.com/resin-frequently-asked-questions/why-is-my-resin-sticky/

[Author]

Posts