[Billy]

Hello, of course this question isn’t the first.

I need to fill 64 Cubic Feet of Rubber Mold with Epoxy Resin that weighs ruffly
9LBS. (I read it’s the Weight of some 1 Gallon jugs of Epoxy.)

How much Resin will I need?

It’s a 11×14 shadow box frame made of Mold Max™ 29NV silicone rubber.
6.07 LBs were needed. It’s 11 Lbs for near $100 Online.

I’ve measured the frame it’s (L 15.5″ x W 11.38″ x H 3″).

But because it’s not solid in the center, I did the math by imagining all the side were stretched out in a long rectangle line of L 56″ x W 3″ x H 5″.

If I filled the mold with water, could that be a good comparison in gallons to how much resin I need even if it’s thicker ?

Thanks .

[Billy]

There’s a typo: L 56″ x W 3″ x H 1/2″

[Katherine Swift]

We do have a couple of articles on knowing how much resin to mix to cover a surface or fill a mold. Links to them are here:

https://www.resinobsession.com/resin-frequently-asked-questions/how-much-resin-do-i-need
https://www.resinobsession.com/resin-art/how-to-apply-a-glossy-resin-layer-to-a-painting

[Billy]

https://www.resinobsession.com/resin-frequently-asked-questions/how-much-resin-do-i-need

Excellent! Very Helpful.

[Katherine Swift]

We have a resin calculator here that does the math for you: https://www.resinobsession.com/resin-calculator/

[Author]

Posts