Resin casting has lines Home Page › Forums › Resin Techniques › Resin casting has lines Tagged: resin-techniques This topic has 2 replies, 1 voice, and was last updated 1 year, 9 months ago by Katherine Swift. Viewing 2 reply threads Author Posts February 17, 2018 at 12:43 pm #12288 Katherine SwiftKeymaster This question comes from Lloyd: I am trying to make cubes and pyramids with different stones and meteorite in them but am running into trouble. I am using Easy Cast. If I pour the resin all at once then the rocks sink and collect together and if I pour in stages (mixing new resin for each stage) there ends up with lines at each stage. Any suggestion? February 17, 2018 at 12:44 pm #12289 Katherine SwiftKeymaster Hi Lloyd, Yes, you will want to pour in layers, otherwise, your items will sink to the bottom. Pour the next layer once the first layer has started to gel, but not completely cure. That will minimize the lines. September 14, 2020 at 1:00 pm #87581 Katherine SwiftKeymaster This article explains what is the resin gel time: https://www.resinobsession.com/resin-frequently-asked-questions/what-is-the-gel-time-of-resin/ Author Posts Viewing 2 reply threads The topic ‘Resin casting has lines’ is closed to new replies.