Resin fail. Patches

This topic contains 3 replies, has 2 voices, and was last updated by  Katherine Swift 6 months, 2 weeks ago.

  • Author
    Posts
  • #22940 Reply

    Emma

    Hi, I’ve mixed and poured Pebeo gede resin on my acrylic painting. 8 hours later and there are patches where the resin has moved and not covered. Can I fill them in with fresh resin once dried?

  • #22983 Reply

    Katherine Swift
    Keymaster

    You can, but you will need to recoat the entire surface, otherwise, it won’t be even.

  • #23709 Reply

    Jennifer

    We have coated a large counter top with resin. 1st attempt left several sticky uncured patches, so we sanded and did a 2nd coat. There is still 1 remaining sticky uncured patch about 4×4 inches. Is spray sealer good in this case?

    • #24058 Reply

      Katherine Swift
      Keymaster

      Unfortunately not. You will need to recoat with another layer of resin.

Reply To: Resin fail. Patches
Your information: