[Gabe]

How would I create ery tight swirls like this in resin?
https://i.imgur.com/bmL9BMy.jpg
I have only cast a couple of times and have zero experience but I am guessing that I would let each color set for quite a while until it was harder and wouldn’t intermix so each color would stay to itself.

Thanks!

[Katherine Swift]

Hi Gabe,

Yes, waiting until the end of the resin’s pot time is definitely the best place to start. You will also need to use a very fine “something” (like a thin gauge wire) to draw from one color to the other to create the lines.

While not exactly what you are doing, this video on our youtube channel should give you some ideas: https://youtu.be/-90Jpl_ZiPI

[Author]

Posts