Home Page › Forums › Resin Troubleshooting › Sticky resin
- This topic has 1 reply, 2 voices, and was last updated 1 year, 4 months ago by
Katherine Swift.
- AuthorPosts
- August 23, 2019 at 7:58 pm #80654
Caili
GuestI made a batch of resin and poured it into two types of molds, ones that I made and ones I purchased. The resin that was in the molds I made came out sticky and the resin in the molds I purchased came out perfectly fine and cured.
This is the silicone I used to make my molds:
Amazing Casting Products Alumilite Amazing Mold Rubber Kit, 0.77- PoundAt first I thought maybe there was water or oil in the mold but I had washed and dried it pretty well.
Any advice? - August 26, 2019 at 9:09 pm #82205
Katherine Swift
KeymasterHi, I’m sorry to hear your resin turned out sticky. This article should give you some ideas on what happened and what you can do differently next time:
https://www.resinobsession.com/resin-frequently-asked-questions/why-is-my-resin-sticky/
- AuthorPosts
- The topic ‘Sticky resin’ is closed to new replies.