Bi-color resin earrings tutorial

bi color resin earrings tutorial

Bi-color resin earrings tutorial

Can you be in love with a resin color?  Every day, I have a new favorite of the Resin Obsession liquid pigments.  On the days I can’t decide which is my favorite, I use two.  *wink-wink*

mixing yellow into resin

I mixed another batch of super clear resin with Resin Obsession opaque yellow pigment this time.

pouring two colors of resin at once into a silicone mold

I poured both colors together into the cavities of our 1 inch round silicone mold trays.  Not shown:  I prepped the mold first with a light layer of the Petrolease mold release.

You know what is ironic about my color choices?  I did the EXACT same color patterns when I did something similar in a bangle bracelet video.  I must have a thing for yellow and green together.

demolding resin from a silicone mold

After letting the resin cure for 24 hours, I demolded the resin discs by peeling the silicone mold away from the hardened resin castings.

marking a drill hole on a resin charm

I thought these would look totally cool as charms on hoop ear wires.  I used a circle template to help me mark the center of each of the castings.  (You should be able to purchase these templates at an office supply store.)

drilling into a resin cabochon

I used my flex shaft and a size #56 drill bit to drill through the resin.  Don’t forget to take proper safety precautions when using a rotary tool.

Note:  the size drill bit I used was a little larger than the wire size of the hoops.

adding resin charms to ear wire hoops

The ear wires were ones I already had made here.  They were made of 22 gauge, half-hard sterling silver wire.  If you were going to make your own, this tutorial looks useful:  hoop wire earring tutorial.

bi color resin earrings

I liked the finished earrings, although I was disappointed they weren’t quite as ‘color-divided’ as I had hoped.  I think the warm resin, poured into a small cavity, made it impossible for it not to do a little mixing on its own.  Next time I try this, I think I will let the resin sit an additional 10 to 15 minutes after mixing to let it cool off some.  The downside to doing this is that any bubbles will be harder to get out at this point.

yellow green bi color resin earrings

For my other pair, I added a couple of cherry beads to the front to help give it a pop of color.

What do you think?  Would you try this?

 

Unpublished Blog Posts of Resin Obsession, LLC © 2015 Resin Obsession, LLC

Like this post? You may be interested in  How to make a bottle cap resin coaster

Leave a Reply

Your email address will not be published. Required fields are marked *