How to Make Resin Bowls

How to make resin bowls

by Penny Reid

I’m going to show you how to make resin bowls using silicone poached egg molds. These resin bowls make great little catch-alls for rings and other things.


resin bowls

I am using shiny silicone poached egg cups as my molds.  You can find these molds with a matte finish as well.

silicone poached egg cups

Step 2:

Now the fun part! Pour the resin into the silicone cups in any order, filling 1/3 to 1/2 of the cup, depending on how big you want the bowl.

HINT: Add the more transparent colored and sparkly resins near the end, this will make the edges more transparent which is a neat effect.

pouring resin into moldpouring resin into mold pouring resin into moldpouring resin into moldpouring resin into moldpouring resin into moldpouring resin into moldpouring resin into moldpouring resin into moldpouring resin into moldpouring resin into mold

Step 3:

Once all the resin is poured, add a silicone poached egg mold on top; this is what will create the bowl. To keep the mold down, carefully add water to weigh it down, making sure the water does not get into your resin because of course, water and resin equals disaster!  Add just enough water to keep the second mold from floating up.  Leave to cure.


placing silicone mold on top of resin in moldplacing silicone mold on top of resin in moldpouring water into silicone moldsilicone molds

Leave to cure for 4 hours or a little more than the halfway cure point, depending on the resin you are using.  You want your resin to be somewhat soft before going on to the next step.

NOTE: This is not critical.  If you don’t get to de-molding and the resin has completely hardened, the project still works.  The next steps can be more difficult, but still totally possible.

dump water from silicon moldtaking resin bowl out of silicone moldtaking resin bowl out of silicone moldresin bowls

Step 5:

You can see the edges are a little uneven.  This is the time to cut off the edges and why you want to try to demold while the resin is still somewhat soft.  It’s easier to cut, but again even if fully cured, it is easy to get rid of the uneven edges with scissors.  It just requires more effort.


cutting resin bowlresin bowls

Step 6:

At this point the edges can be finished however you desire.  They can be sanded down and polished or you can add a little extra finish.  I find that dimensional mod podge is nice and thick and holds well to the edges. Sprinkle some sparkles over the wet mod podge.  I used embossing powder for these — a bronze powder and a silver holographic one.  You can see you some sparkles traveled into the bowl in part and because they had some glue on them they stayed there.  This is one of those happy accidents I think adds to the bowls!  Leave to dry.


Modge Podge and glitteradding modge podge to edge of resin bowlsprinkling glitter onto Modge Podgeresin bowls

resin bowls

P.S. I mixed too much resin when making these resin bowls so I got out a wood canvas and randomly poured on the leftover resin.  I used a toothpick to move the resin around and ended up with a pretty nice piece of work!


leftover resin poured on wodden canvas

What other questions do you have about how to make resin bowls?  Would you try this?

Like this post? You may be interested in  DIY napkin rings - Make resin flower napkin rings


Unpublished Blog Posts of Resin Obsession, LLC © 2018 Resin Obsession, LLC


Resin Wares

Thanks for the great suggestion, ordered some egg cups off Amazon so I can make these as Christmas presents. Also that’s the best looking tile I’ve seen you share, very cool coloring!


I love the bowls! I am definitely going to try this! I also LOVE the resin painting, the colors are amazing and the bronzy glitter just pops! Kudos!!!


Thanks for the great ideas!
Just wondering if you have any tips regarding the polishing of resin, haven’t been able to find anything that works on crystal clear finish?
Thanks, Susanne


I have found no resin that is certified food safe. These could be great ring dishes or other things.


I found some embossing order on a local yard sale site and was wondering if this is a preferred glitter to use. I haven’t decided whether I should buy it or not. Thank you

Julie Misasi

you don’t give ratios on resin to paint? can you give me an idea of how much resin vs paint?

Katherine Swift

You shouldn’t use more than 1 part paint to 10 parts mixed resin.


Leave a Reply

Your email address will not be published. Required fields are marked *